Industrial marking
Markings for maritime and rail transport
Markings, lettering and logos for shipping containers, railway wagons and modular buildings that withstand sea, frost and fuel. Made from industrial Arlon films that we import ourselves, so the material is always in stock.

What we mark
From a single marking to an entire series
Shipping containers
Identification markings, weight and payload data, owner and lessor logos.
Railway wagons
Lettering, vehicle numbers, technical and warning markings, and operator logos.
Modular and rental units
Logos, lessor markings, contact details and instructions on accommodation and office containers.
Warning and safety markings
Lifting, load and handling markings, and RID/ADR labels for dangerous goods.
Durability
Made for conditions where ordinary stickers peel off
For every application we choose the combination of film, adhesive and protective laminate that keeps the marking legible for the whole life of the container or wagon.
Sun and UV
Colours do not fade, the film does not crack.
Rain, snow and ice
Edges stay sealed, water does not get under the film.
Frost and heat
From −54 °C to +107 °C, even on metal that heats up strongly in the sun.
Sea and salt
For containers that travel on ships and stand in ports.
Fuels and oils
Petrol, diesel, hydraulic oils and lubricants do not smear the print.
Washing and detergents
Resistant to high-pressure washing and industrial cleaners.
Material
Official Arlon importer, material always in stock
We import industrial films and laminates directly, so we never wait for suppliers and can repeat a series with the same material years later.
- Arlon DPF 4000 in stock: a film developed specifically for markings on shipping and rail containers, for temperatures from −54 °C to +107 °C
- Films for flat, corrugated and riveted surfaces
- Arlon DPF 8200 High Tack in stock: a high-tack adhesive for galvanised structures and rough, low-energy surfaces where ordinary films do not stick
- Protective laminates against UV, chemicals and abrasion
- The same colour and quality with every repeat order
- Material technical data sheets on request

Official importer for Slovenia
Technical data
What you can expect
| Material | Industrial Arlon films and protective laminates |
| Container film | Arlon DPF 4000, developed for markings on shipping and rail containers |
| Demanding surfaces | Galvanised structures, rough and low-energy surfaces: Arlon DPF 8200 High Tack |
| Production | Digital print with lamination, or cut vinyl |
| Outdoor durability | Up to 10 years on average with protective laminate |
| Temperature range | −54 °C to +107 °C (Arlon DPF 4000) |
| Resistance | UV, rain, snow, sea salt, fuels, oils, detergents, high-pressure washing |
| Markings | To the customer’s drawing: container identification, wagon numbers, logos, warnings |
| Series | From single markings to series with sequential numbers |
| Lead time | Up to 5 working days, urgent orders also same day |
How we work
From drawing to marking on the container
You send a drawing
A drawing, a list of markings or a photo of the existing marking.
We choose the material
Based on the surface, the container’s route and the chemicals it comes into contact with.
Quote within 24 hours
With a price per piece or per series and the lead time.
Production in Celje
Printing, lamination and cutting within 5 working days at most. Some urgent orders are produced the same day.
Delivery
To your address or directly to your production line.

References
Projects travelling across Europe
Containers with our markings travel by rail and sea for customers all over Europe.













Questions
Frequently asked questions
How long do markings last on a container that travels by sea?
Up to 10 years on average when the print is protected with laminate. The exact lifetime depends on the film chosen and the exposure. With the quote we tell you which combination we recommend and why.
Do the markings withstand contact with fuel and oils?
Yes. For surfaces that come into contact with fuels, oils or detergents we use a protective laminate that is resistant to these substances.
Do the stickers adhere to galvanised structures?
Yes. For galvanised structures and rough, low-energy surfaces we use Arlon DPF 8200 High Tack film with a strong permanent adhesive, which we keep in stock.
In what format should I send the drawing?
The drawing should be a vector file (PDF, AI, EPS, SVG, DXF or DWG), because we cut and print directly from it. If you do not have a vector drawing, write to us and we will find a solution.
Can I order a series with sequential numbers?
Yes. Each marking in the series gets its own number, and they are packed in order for quick application.
How quickly can you produce the markings?
Usually within 5 working days at most. Our printer cures the ink extremely fast, so the print can be laminated right after printing. This lets us produce some urgent orders the same day. Call us and we will check whether it is possible.
Do you also install the markings?
Yes, we can offer installation, in Slovenia and for larger projects also in Austria. For details and any other questions write to info@compart.si.
Tell us what you need to mark
Write what you are interested in. If you have drawings, send them to info@compart.si. We reply within 24 hours, in English or German.
info@compart.si
Mon–Fri 7:30–14:30 (CET)
